XL70V2NB28-1 Collet For Engine Shaft V2
- Helicopters
XL70V2NB28-1 Collet For Engine Shaft V2
$ 6.99
Introduction
Small-Angle Taper Collet (New Design)
• Compared with the previous collet, it features a smaller taper angle and a bi-directional slot design, providing much stronger clamping force.
• The stronger taper engagement ensures a more secure hold during high-RPM operation, making it less likely to loosen.
• No thread-locking compound is required for installation, preventing issues with disassembly.
• Highly recommended to replace the collet every time you disassemble, to ensure proper concentricity of the engine shaft and optimal engagement strength.
• Compared with the previous collet, it features a smaller taper angle and a bi-directional slot design, providing much stronger clamping force.
• The stronger taper engagement ensures a more secure hold during high-RPM operation, making it less likely to loosen.
• No thread-locking compound is required for installation, preventing issues with disassembly.
• Highly recommended to replace the collet every time you disassemble, to ensure proper concentricity of the engine shaft and optimal engagement strength.
• ⚠️ Note: This collet can only be used with the new engine shaft and is not compatible with the old version.
